logo
cases_banner
Position:
Home  >  cases  >  SA516 GR60N HIC Steel Plate for Wet H2S Service

SA516 GR60N HIC Steel Plate for Wet H2S Service

2026-10-30 | More News

SA516 GR60N HIC Steel Plate — Overview

SA516 Grade 60 N HIC is a normalized carbon-manganese steel plate manufactured to ASTM A516 / ASME SA-516 standards, with additional processing and testing to ensure resistance to hydrogen-induced cracking in wet H₂S (sour) service. The “N” designation indicates normalized heat treatment, and “HIC” indicates the material has been tested and certified per NACE TM0284.

  • Min. Tensile Strength:415 MPa
  • Min. Yield Strength:220 MPa
  • Min. Elongation (200mm):23%
  • Max. Sulfur (HIC Grade):≤0.003%

Standards & Designations

Standard / Designation Description
ASTM A516 / ASME SA-516 Pressure vessel plates, carbon steel, for moderate and lower temperature service
Grade 60 415–550 MPa minimum tensile strength class
N (Normalized) Fully normalized heat treatment for optimal toughness and microstructure
HIC (Hydrogen-Induced Cracking) Tested and certified per NACE TM0284 for sour service resistance
NACE MR0175 / ISO 15156 Materials for use in H₂S-containing environments in oil and gas production
NACE TM0284 Evaluation of pipeline and pressure vessel steels for resistance to HIC
NACE TM0177 Laboratory testing of metals for resistance to SSC in H₂S environments

What Is Wet H2S Service (Sour Service)?

Wet H2S service, also known as sour service, refers to process environments where hydrogen sulfide (H₂S) gas is present in sufficient quantities — typically in aqueous or condensed form — to cause specific forms of corrosion damage in carbon and low-alloy steels. This condition is common in oil and gas production, refining, natural gas processing, and petrochemical operations.

Primary Damage Mechanisms in Wet H2S Environments

HIC -Hydrogen-Induced Cracking

Atomic hydrogen diffuses into steel and accumulates at internal inclusions (MnS, oxides), forming molecular hydrogen gas. Internal pressure builds, creating stepwise cracks parallel to the rolling surface.

SSC-Sulfide Stress Cracking

A form of hydrogen embrittlement that occurs under tensile stress in sour environments. SSC is most dangerous at lower pH and higher H₂S partial pressures, leading to rapid brittle fracture.

SWC-Stepwise Cracking

A severe manifestation of HIC where multiple HIC cracks link up through the plate thickness, forming stair-like crack networks that can significantly reduce wall integrity.

SOHIC-Stress-Oriented HIC

Combines HIC with residual or applied tensile stress. Cracks propagate perpendicular to the stress direction, typically near weld heat-affected zones (HAZ).

Chemical Composition of SA516 Grade 60 HIC plate

The chemical composition of HIC-resistant SA516 Grade 60 is tightly controlled to minimize impurities that act as HIC initiation sites. Key differences from standard Grade 60 include ultra-low sulfur, reduced manganese segregation, and controlled inclusion morphology.

Symbol Standard A516 Gr.60 (max) HIC Grade (typical)
C ≤0.27% ≤0.20%
Mn ≤1.20% 0.80 – 1.20%
Si ≤0.40% 0.15 – 0.40%
S ≤0.035% ≤0.003%
P ≤0.035% ≤0.015%
Cu ≤0.40% ≤0.25%
Ni ≤0.25% ≤0.20%
Cr ≤0.25% ≤0.15%
Mo ≤0.08% ≤0.08%
V ≤0.03% ≤0.03%
Nb ≤0.02% ≤0.02%
Al — ≥0.020% (total)
CEV ≤0.43%* ≤0.38%

Mechanical Properties of SA516 Grade 60 HIC plate

SA516 Grade 60 HIC plates are delivered in the normalized condition to ensure a uniform, fine-grained ferrite-pearlite microstructure with excellent through-thickness properties and Charpy V-notch toughness.

Property Standard Value (≤40mm) Value (40–100mm) Value (100–200mm)
Tensile Strength, Rm min. 415 – 550 MPa 415 – 550 MPa 415 – 550 MPa
Yield Strength, Re min. 220 MPa 205 MPa 195 MPa
Elongation, A (200mm) min. 23% 23% 22%
Elongation, A (50mm) min. 27% 26% 25%
Charpy V-Notch (longitudinal) min. 27 J @ -46°C* 27 J @ -40°C* 27 J @ -34°C*
Hardness (HBW) max. ≤200 HBW ≤200 HBW ≤200 HBW
Bend Test (180°) — Pass (d=3t) Pass (d=3t) Pass (d=3t)

Acceptance Criteria — Crack Ratio Parameters

Parameter Symbol Definition Acceptance Criteria (HIC Resistant)
Crack Sensitivity Ratio CSR Total crack area / total section area × 100% ≤ 1.5% (most common)
Crack Length Ratio CLR Sum of crack lengths / section width × 100% ≤ 15% (most common)
Crack Thickness Ratio CTR Sum of crack thicknesses / section thickness × 100% ≤ 5% (most common)

Key Advantages of SA516 GR60N HIC

Specifying HIC-resistant SA516 Grade 60 for wet H2S service offers measurable benefits over standard carbon steel and alternative materials:

🛡️Proven HIC Resistance

Ultra-low sulfur, calcium-treated inclusions, and controlled microstructure deliver verified resistance to hydrogen-induced cracking per NACE TM0284.

⚙️Excellent Weldability

Low carbon equivalent (CEV ≤ 0.38%) ensures good field weldability with conventional welding procedures — no preheat or minimal preheat required.

❄️Low-Temperature Toughness

Normalized fine-grain microstructure provides reliable Charpy impact toughness down to -46°C, suitable for cold regions and low-temperature process duty.

💰Cost-Effective vs. Alloys

Significantly lower cost than stainless steels, clad plates, or nickel alloys while meeting sour service requirements for many refinery and gas processing applications.

📋NACE MR0175 Compliant

Meets the material requirements of NACE MR0175 / ISO 15156 for H₂S-containing environments, satisfying most oil & gas project specifications.

🔧Wide Availability

Available in a broad range of thicknesses (6–200mm+), widths, and lengths with short lead times for standard dimensions from qualified stockists.

Industry Applications of  SA516 GR60N HIC steel plate

SA516 GR60N HIC steel plates are specified across the energy sector for equipment operating in sour service conditions. Primary applications include:

Oil & Gas Production and Processing

  • Pressure vessels for sour gas separation and treatment
  • Horizontal and vertical separators (two-phase, three-phase)
  • Filter vessels and coalescers for natural gas sweetening
  • Wellhead equipment and Christmas tree components

Refining Industry

  • Hydrodesulfurization (HDS) reactors and associated vessels
  • Hydrotreater and hydrocracker process equipment
  • Amine treaters and regenerators for sulfur removal
  • Sour water stripper feed tanks and columns
  • Crude distillation unit overhead drums and accumulators

Storage and Transport

  • Sour crude storage tanks (API 650, Annex N)
  • Pressure vessels for LPG with H₂S content
  • Pipework and headers in sour service piping systems

Typical Plate Dimensions

Parameter Standard Range Extended Range (on request)
Thickness 6 – 100 mm 100 – 200 mm+
Width 1,500 – 3,000 mm Up to 4,000 mm
Length 6,000 – 12,000 mm Up to 16,000 mm
Unit Weight Up to 12 tons per plate Up to 25 tons per plate
Not Sure Which Grade You Need?

Our technical team can help you select the optimal material based on your process conditions (H₂S partial pressure, pH, temperature, chloride content) and applicable design codes (ASME BPVC, API, NACE). Contact us for a free material selection consultation.

FAQ

What is the difference between SA516 Grade 60 and SA516 Grade 60 HIC?

Standard SA516 Grade 60 is a general-purpose pressure vessel steel with sulfur content up to 0.035%. SA516 Grade 60 HIC is produced with ultra-low sulfur (≤0.003%), calcium treatment for inclusion shape control, and normalized microstructure. It is specifically tested for hydrogen-induced cracking resistance per NACE TM0284, making it suitable for wet H₂S (sour) service where standard Grade 60 would be susceptible to HIC failure.

Is SA516 GR60N HIC the same as NACE MR0175 compliant?

SA516 GR60N HIC plates are manufactured to meet the material requirements of NACE MR0175 / ISO 15156 for carbon steel in H₂S-containing environments. Key requirements include controlled composition (low sulfur, limited alloy content), hardness ≤ 22 HRC, and HIC testing (for the most severe applications). However, compliance must be verified against the specific part and section of NACE MR0175 applicable to your service conditions. We can provide a compliance statement with each order.

Can SA516 GR60N HIC be welded? What are the welding considerations?

Yes, SA516 GR60N HIC has excellent weldability due to its low carbon equivalent (typically ≤0.38%). Conventional welding processes (SMAW, SAW, GMAW, GTAW) can be used with matching or slightly undermatching consumables. Key considerations for sour service: (1) Post-weld heat treatment (PWHT) is often required to reduce residual stress and ensure weld HAZ hardness ≤ 22 HRC; (2) Use low-hydrogen welding consumables; (3) Preheat may be needed for thicker sections; (4) Weld procedure qualification should include hardness testing and optional SSC testing per NACE TM0177.

What is the maximum service temperature for SA516 GR60N HIC?

SA516 Grade 60 is designed for moderate and lower temperature service. The ASME Boiler & Pressure Vessel Code allows its use up to approximately 425°C (800°F) for thicknesses up to 100mm. However, for HIC-resistant sour service applications, most operating temperatures fall in the range of -30°C to 250°C. At temperatures above 300°C, Cr-Mo alloyed grades such as SA387 are typically preferred. For low-temperature service, Charpy impact test requirements should be specified based on the minimum design metal temperature (MDMT).
Related Cases

Contact GNEE today for more details about Custom-Engineered Solutions.

Sent E-mail